If you are looking for an OEM supplier of cobalt alloy steam turbine blade strips or custom erosion shields, SYTOP can manufacture finished components according to your drawings. We supply Cobalt Alloy 6 and Cobalt Alloy 6B blade protection strips for OEM and replacement requirements, with custom curvature, thickness, profiles, dimensions, and inspection documentation.
Whether your drawing identifies the component as a blade protection strip, erosion shield, or shield strip, SYTOP treats it as a drawing-defined finished part rather than standard strip stock. Material requirements, geometry, drawing revision, and inspection scope are reviewed before production to ensure the supplied component matches the specified requirement.
SYTOP OEM Blade Strip
A steam turbine blade strip follows the contour of a specific blade design. Curvature, section, length, edge geometry, and surface requirements are therefore defined by the finished-part drawing. Supplying only cobalt alloy sheet or rectangular strip stock would still leave the customer with forming and dimensional work to complete. SYTOP supplies drawing-matched finished blade strips rather than raw strip stock.
Cobalt Alloy 6 and 6B Options for Steam Turbine Blade Strips
SYTOP can manufacture steam turbine blade strips in both Cobalt Alloy 6 and Cobalt Alloy 6B according to customer drawings and material specifications.
Cobalt Alloy 6, commonly associated with UNS R30006, is widely used for wear- and erosion-resistant components. Cobalt Alloy 6B, commonly identified as UNS R30016, is a wrought cobalt alloy, with AMS 5894 covering solution-heat-treated bar, sheet, and plate.
Whether your project specifies Cobalt Alloy 6 or Cobalt Alloy 6B, SYTOP can evaluate the required material form together with the finished strip geometry and supply the component according to the confirmed drawing and specification.
Made to Your Steam Turbine Blade Drawing
OEM production is based on the customer's latest released drawing. SYTOP reviews the drawing number, revision, part number, material requirement, quantity, and key dimensions before production.
For projects involving multiple turbine stages, each blade strip can be managed as a separate item with its own drawing, dimensions, quantity, material requirement, and inspection records. This helps avoid confusion between parts that may use the same alloy but have different curvature or profiles.
For repeat orders, previously confirmed drawings and inspection records can also provide a useful production reference, helping maintain consistency between batches while the latest released drawing remains the basis for production.
Material and Dimensional Records Support Incoming Inspection
SYTOP can provide material documentation and dimensional inspection reports with finished steam turbine blade strips. These records help customers verify the supplied cobalt alloy and check key finished dimensions against the agreed drawing requirements.
Additional inspection can be arranged when required, including hardness testing, chemical composition verification, non-destructive testing (NDT), witness inspection, and third-party laboratory testing. Inspection methods, sampling requirements, acceptance criteria, and report formats can be confirmed before production.
Why Source Custom Steam Turbine Erosion Shields from SYTOP
SYTOP specializes in cobalt alloy materials and custom cobalt alloy components. For steam turbine blade strip projects, we can support both the material requirement and finished-part manufacturing within one supply process.
Our capabilities include:
- Cobalt Alloy 6 and Cobalt Alloy 6B options
- Finished blade strips manufactured to customer drawings
- Custom curvature, profiles, thicknesses, and dimensions
- Single-part, multi-stage, and replacement component requirements
- Material certificates and dimensional inspection reports
- Additional testing and third-party inspection when required
Whether you are sourcing strips for a new turbine project or replacing existing erosion shields during maintenance, SYTOP can evaluate the drawing and prepare the required finished component accordingly.
Start the OEM Review with the Drawing You Already Have
You do not need a complete RFQ package to start an enquiry. Send us the latest available drawing together with the material requirement and quantity, and SYTOP can begin an initial manufacturing review.
- Finished-part drawing and revision.
- Cobalt Alloy 6 or Cobalt Alloy 6B reference and any stated material standard.
- Quantity for each drawing or turbine-stage item.
- Required material and dimensional records.
- Any additional testing, third-party inspection, or first-article requirement.
Send your drawings to SYTOP via WhatsApp / WeChat at +86 130 0924 9727 or email sales@sytop.cn. We can review your steam turbine blade strip requirements and prepare a quotation for finished OEM cobalt alloy erosion shields.
